Over her palazzo pants-jumpsuit, Roshumba wears a simple hoop link chain belt. Snip off a length of chain then add a claw "catch" to one end. This belt can be worn by all of my dolls since the catch can clip onto any of the hoops. For other types of chain, you should decide how you want the belt to hang on the doll, then add a eye ring where you want the belt to close on the body. You'll also need to think about what goes on the opposite end. For that you can add a tiny charm, pendant or even a tassel.
The "CHANEL" chain belt
In the halls of high fashion, when you think of chain belts, the name Chanel comes to mind. Keep in mind, this is a fashion company, so there is no one style fixed in stone for the belts or the bags. That said, there are a few iconic looks your fashion maven always wants and any of these featured below will fit the bill. Moreover, they are pretty simple to make!
Here is a simple chain belt with a tiny strip of leather threaded through the chain. Cut the chain so that it fits around the doll's hips plus extra (about 1.5 inches or 4cm) for the overhang. Cut the strip of leather (or narrow ribbon) roughly 1-1/2 times the length of the chain. Thread it under and over each loop of the chain. Hold the chain flat and try to keep it from twisting as you work. When you get to the end, fold the leather strip under and glue in place. (Sometimes I will thread it back through two loops on the underside and then glue.) Here I've added a small leather tassel to the end of the belt.
Many of the Chanel belts have one or two tiers of chain that drop over hips from the waist.
Don't be shy about getting creative. Here, I found my mother's old chain link necklace. By itself, it makes for quite a nice belt. But since my dolls like bling, I took it one step further, and linked a second chain to the original belt.
Check out the multitude of novelty chains available in crafts stores and jewelry supply shops. If you can't find something similar to the one featured below, make your own by adding tiny charms to a regular chain!
Here, Carla was happy enough with a single strand chain belt of tiny Buddha heads. However, remembering how much fun I had wearing "belly dancer belts," I decided I'd make a double strand belt. As you can see, I hung the belt directly on the doll and pinned it in place as I worked.
It's a Wrap!
Corset belts are big for Fall. And it's no wonder...Silhouettes are getting bigger, looser, longer. Dolly could become quite overwhelmed with such voluminous clothing. So it makes sense that corsets, waist cinchers, and wrap belts would be a popular accessory to feminize cool weather looks or give an edge to urban styles. Here, I show you two ways of making this corset belt.
1. Take two small scraps of fabric and press it close to the doll's body. pin at each side.
2. Draw a line indicating the center front. Mark the sides. Turn the doll over and mark the center back. Now draw the shape of the corset.
3. Remove from the doll and trace the pattern onto paper (center front to side). For the front, fold along the center front line to make sure your pattern is symmetrical. Adjust if needed. For the back, cut along the center back. You will need to do the back in two parts.
4. Since I'm working in leather, I only need to add seam allowance to the side seams and the back center seam. You can also reverse and have your center front open (with lacing up the front,) if desired.
I decided I want this corset to fit all of my 12-inch dolls. So instead of adding Velcro or hook and eyes down the back, I punched in eyelets, then threaded a tiny strip of leather which wraps around the back and ties in the front. You can leave it like that, or give it an extra zing by adding a fob watch chain.
All I've done is to take a bit of chain then add S-links at both sides. The S-link is just that---wire fashioned into an S shape. Squeeze one end to close over a loop. Leave the other end open. This little chain-ette hooks onto the top of the corset and onto the belt.
This is another (no sew) variation. Again, I've draped this directly on to the doll. It is a one-piece belt that wraps around the back and ties in the front. The widest part is in the front, but then it progressively gets narrower at the back. If your leather isn't wide enough to do this in one piece, then glue on extensions. She can wear it as is or.....layer on a straight black strap (as seen in the above photo).
This is super simple and the perfect belt to wear with peasant shirts and full gathered skirts. Cut a rectangle of leather the width of the doll's waist. Add the metal eyelets and laces.
The Bow-Tie Belt
This looks like a single piece of leather wrapped around the doll's waist. However, look again and note how "perfect" the belt fits around the doll.
The secret is in the pattern (7-3/4 inch or 19cm) which resembles a double sided spoon. The narrow part (3/8" or 1cm) fits around the waist but the ends are cut much wider and shaped into petals with points at both ends. Cut the belt out in fabric first to be sure everything fits correctly. Then be sure you use a very lightweight leather, pleather or vinyl. You can make this in fabric but you'll need to hem or line it.
The Fringe Belt
Rubber
Follow us on Twitter: @FashDollStylist
We're also on Pinterest: www.pinterest.com/FashDollStylist
All photos and text property of Fashion Doll Stylist. 2015.